JOB DESCRIPTIONIPQA & Final QA - System Manufacturing & MEA Manufacturing
(Build-to-FG and OK-to-Shipment)
1. Position Title
Quality Engineer
2. Department
Quality Assurance
3. Reporting To
Senior Manager - Quality
4. Job Purpose
To ensure in-process and final quality of System Manufacturing products from build-to-FG
...
through OK-to-Shipment by implementing robust inspection processes, adherence to
quality standards, and effective containment of non-conformities.
5. Key Responsibilities
A. In-Process Quality Assurance (IPQA)
- Conduct stage-wise inspections during system assembly and MEA manufacturing
processes.
- Verify compliance with approved drawings, BOM, SOPs, work instructions, and control
plans.
- Monitor critical process parameters and ensure adherence to defined quality gates.
- Perform first article inspection (FAI) / initial sample inspection.
- Identify, document, and escalate deviations, defects, and non-conformities.
- Ensure proper implementation of in-process checks by production teams.
- Support line clearance activities and changeover validations.
B. Final Quality Assurance (FQA)
- Perform final inspection of finished systems and MEA assemblies before FG release.
- Verify product configuration, labeling, packaging, and documentation completeness.
- Ensure product meets customer specifications and regulatory requirements.
- Conduct functional testing / verification as applicable.
- Ensure correct serialization, traceability, and batch control.
C. Build-to-FG & OK-to-Shipment Control
- Validate product quality from manufacturing completion to FG stage.
- Ensure all inspection and test records are complete and approved.
- Review and authorize OK-to-Shipment based on compliance.
- Coordinate with warehouse/logistics for release of conforming products only.
- Prevent shipment of non-conforming or unverified products.
D. Non-Conformance Management
- Raise Non-Conformance Reports (NCRs) and track closure.
- Participate in root cause analysis (RCA) and corrective/preventive actions (CAPA).
- Implement containment actions for defective lots.
- Support MRB (Material Review Board) activities.
E. Documentation & Compliance
- Maintain inspection records, checklists, and quality reports.
- Ensure compliance with ISO 9001 / applicable QMS standards.
- Support internal and external audits.
F. Continuous Improvement
- Identify quality improvement opportunities in processes.
- Defect reduction initiatives.
- Analyze quality data and drive trend-based improvements.
G. Cross-functional Coordination
- Work closely with Production, Warehouse, and Supply Chain teams.
- Liaise with suppliers and customers on quality-related issues.
- Provide feedback on process improvements.
6. Qualifications
- Diploma / Bachelor's degree in Mechanical / Electrical / Electronics / Industrial
Engineering or related field.
7. Experience
- 3-8 years of experience in Quality role in anufacturing environment.
8. Skills & Competencies
- Strong knowledge of inspection techniques and quality tools.
- Familiarity with GD&T, drawings, and technical specifications.
- Knowledge of ISO 9001 and QMS practices.
- Good understanding of manufacturing processes and control plans.
- Proficiency in measurement tools and testing equipment.
- Analytical thinking and problem-solving skills.
- Attention to detail and strong documentation skills.
- Communication and coordination skills.
9. Tools & Equipment
- Calipers, micrometers, gauges, test equipment.
10. Key Performance Indicators (KPIs)
- First pass yield (FPY).
- Defect escape rate (internal and external).
- On-time inspection and release..
- CAPA closure effectiveness.
11. Authority
- Hold / release product at IPQA and final QA stage.
- Reject or quarantine non-conforming products.
12. Working Conditions
- Shop floor and inspection environment.
13. Key Interfaces
- Production
- Engineering / R&D
- Warehouse & Logistics
- Supplier Quality
- Customer Support
experience
8show moreJOB DESCRIPTIONIPQA & Final QA - System Manufacturing & MEA Manufacturing
(Build-to-FG and OK-to-Shipment)
1. Position Title
Quality Engineer
2. Department
Quality Assurance
3. Reporting To
Senior Manager - Quality
4. Job Purpose
To ensure in-process and final quality of System Manufacturing products from build-to-FG
through OK-to-Shipment by implementing robust inspection processes, adherence to
quality standards, and effective containment of non-conformities.
5. Key Responsibilities
A. In-Process Quality Assurance (IPQA)
- Conduct stage-wise inspections during system assembly and MEA manufacturing
processes.
- Verify compliance with approved drawings, BOM, SOPs, work instructions, and control
plans.
- Monitor critical process parameters and ensure adherence to defined quality gates.
- Perform first article inspection (FAI) / initial sample inspection.
- Identify, document, and escalate deviations, defects, and non-conformities.
- Ensure proper implementation of in-process checks by production teams.
- Support line clearance activities and changeover validations.
...
B. Final Quality Assurance (FQA)
- Perform final inspection of finished systems and MEA assemblies before FG release.
- Verify product configuration, labeling, packaging, and documentation completeness.
- Ensure product meets customer specifications and regulatory requirements.
- Conduct functional testing / verification as applicable.
- Ensure correct serialization, traceability, and batch control.
C. Build-to-FG & OK-to-Shipment Control
- Validate product quality from manufacturing completion to FG stage.
- Ensure all inspection and test records are complete and approved.
- Review and authorize OK-to-Shipment based on compliance.
- Coordinate with warehouse/logistics for release of conforming products only.
- Prevent shipment of non-conforming or unverified products.
D. Non-Conformance Management
- Raise Non-Conformance Reports (NCRs) and track closure.
- Participate in root cause analysis (RCA) and corrective/preventive actions (CAPA).
- Implement containment actions for defective lots.
- Support MRB (Material Review Board) activities.
E. Documentation & Compliance
- Maintain inspection records, checklists, and quality reports.
- Ensure compliance with ISO 9001 / applicable QMS standards.
- Support internal and external audits.
F. Continuous Improvement
- Identify quality improvement opportunities in processes.
- Defect reduction initiatives.
- Analyze quality data and drive trend-based improvements.
G. Cross-functional Coordination
- Work closely with Production, Warehouse, and Supply Chain teams.
- Liaise with suppliers and customers on quality-related issues.
- Provide feedback on process improvements.
6. Qualifications
- Diploma / Bachelor's degree in Mechanical / Electrical / Electronics / Industrial
Engineering or related field.
7. Experience
- 3-8 years of experience in Quality role in anufacturing environment.
8. Skills & Competencies
- Strong knowledge of inspection techniques and quality tools.
- Familiarity with GD&T, drawings, and technical specifications.
- Knowledge of ISO 9001 and QMS practices.
- Good understanding of manufacturing processes and control plans.
- Proficiency in measurement tools and testing equipment.
- Analytical thinking and problem-solving skills.
- Attention to detail and strong documentation skills.
- Communication and coordination skills.
9. Tools & Equipment
- Calipers, micrometers, gauges, test equipment.
10. Key Performance Indicators (KPIs)
- First pass yield (FPY).
- Defect escape rate (internal and external).
- On-time inspection and release..
- CAPA closure effectiveness.
11. Authority
- Hold / release product at IPQA and final QA stage.
- Reject or quarantine non-conforming products.
12. Working Conditions
- Shop floor and inspection environment.
13. Key Interfaces
- Production
- Engineering / R&D
- Warehouse & Logistics
- Supplier Quality
- Customer Support
experience
8show more