62 maintenance technician jobs found in tamil nadu.

Position : Maintenance Technician (Field Service Technician)Job Type : Project BasedPayroll Company: Randstad IndiaDuration : 12 Month extendableLocation : Chennai, Bangalore   Job Requirements and QualificationsMinimum qualification: ITI (Industrial Training Institute) or diplomaExperience: 1-2 years in any relevant industrySkills: Basic knowledge of spanners, ability to open RECD nuts and bolts, remove catalytic converters/filters, clean using air

JOB PURPOSE:The incumbent performs work using quality processes, plans and tools that are part of Quality Management System and Production System. Quality Techniciansperform tactical Quality Management duties, JOB RELATED STATISTICS:• Providing Interim Containment Action plan within 24 hrs for customer complaints.• Outbound Inspection completed as per Wave plan timing.• Submitting Quality Alert and Corrective Action Request to Suppliers.• Tracking

Job ResponsibilitiesProcess Optimization: Monitor and optimize compression molding processes to maintain high production yields (typically >95%).Tool Changes: Execute and supervise rapid tool changes (RTC) as per production schedules.Quality Control: Inspect molded parts and review reports to ensure quality standards are met.Troubleshooting: Respond to equipment alarms and resolve process-related issues.Maintenance: Perform daily mold cleaning, shutdown,

About the Role:We are seeking a skilled and reliable Windmill Blade Operator to join our team. You will be responsible for operating and maintaining the equipment used in the manufacturing process of wind turbine blades, ensuring the production of high-quality components for our wind energy projects.Responsibilities: Machine Operation:* Safely operate and maintain various machinery and equipment involved in blade manufacturing, including:* Blade molding

StrategicProvide technical inputs for future capacity expansion ensuring optimum utilization of internal resources and appropriate selection of new equipment.Financial Provide necessary inputs towards finalization of budget of the unit by providing estimate for m/c maintenance & utility budget and ensure adherence to the same.Drive cost savings through energy conservation, effective spare management etc.ProcessDevelop asset criticality index and identify

Responsibilities:1. Equipment maintenance experience in Dry sand blasting / Wet sand blasting equipment , Industrial surface cleaning machines ( Ultrasonic, Spray )2. Lead machine setup, calibration and operation of Dry sand blasting / Wet sand blasting equipment , Industrial surface cleaning machines ( Ultrasonic, Spray )3. Knowledge in support systems of machines like Vacuum pumps, Chillers, pumps, Conveyor maintenance,Critical spares testing and

Key Responsibilities• Reliability data analysis• RCA (Root Cause Analysis) facilitation• FMEA and criticality analysis• Predictive maintenance program• Condition monitoring implementation• Spare parts optimization• Reliability training Key Performance Indicators• MTBF Improvement: Year-on-year increase• Breakdown Reduction: ≥20% annually• PM Optimization: Improved PM efficiency• Cost Savings: Documented improvements Success Factors• Reliability

Minimum Qualifications:·Diploma/B.Tech in Mechanical/Electrical/Instrumentation·Relevant certificationsExperience:·7-10 years in maintenance.·3-5 years in supervisory role.·Automated equipment experience.Role Objectives:·Supervise maintenance team per shift.·Ensure quick breakdown response.·Manage preventive maintenance.·Coordinate with production.experience10

JOB PURPOSE:The incumbent performs work using quality processes, plans and tools that are part of Quality Management System and Production System. Quality Techniciansperform tactical Quality Management duties, JOB RELATED STATISTICS:• Providing Interim Containment Action plan within 24 hrs for customer complaints.• Outbound Inspection completed as per Wave plan timing.• Submitting Quality Alert and Corrective Action Request to Suppliers.• Tracking

Key Responsibilities:     1. PLC Programming & Troubleshooting  Write, modify, and troubleshoot ladder logic and function block diagrams in GX Works2/3 or GX Developer.  Diagnose and resolve PLC faults to minimize downtime.  Adjust or optimize existing programs based on machine or production requirements.     2. Integration & Commissioning  Integrate Mitsubishi PLCs with HMIs (e.g., Proface,GOT series) and SCADA systems.  Commission new control panels or

Key responsibilities Work experience in Automotive Industries following IATF 16949, safety standards.  Knowledge in PLC Programming, troubleshooting & program modification for improvements. Experience in understanding electrical circuit diagram & trouble shooting for problem solving.  Experience in implementation of Poka-yoke interlocks for assembly lines and traceability system. Experience in Cycle time study of manufacturing lines & implementing Single

1. Machine maintenance experience in chemical etching tools (dry etchers, wet benches, plasma etchers) 2. Troubleshoot and repair vacuum systems, RF power supplies, pumps, chillers, and gas delivery systems, mass flow controllers 3.Understand and monitor etching process parameters (etch rate, selectivity, uniformity, CD profile). 4. Collaborate with process engineers to resolve process-related issues (under-etch, over-etch, particle contamination). 5.

Job Location - Vallam, Sriperumbudur,  https://www.fst.comCompression Molding EngineerExperience Level: 4–5 years preferredIndustry: Manufacturing / Automotive / Plastics / Rubber experience6

Injection Moulding EngineerExperience Level: 4–5 years preferredIndustry: Plastics / Rubber  experience7

Job Title- Data Entry And Record ManitenanceJob Location-  Redhills ChennaiQualification- 12th passRequired - Fresher and Experience both can applyInbound :- Check vehicle seal condition and match seal number with challan then start the unloading process with 100% Scanning. Proper staking as per the company norms. Must ensure that Material immediately unloads and proper stack as per their location so that minimum halt time of Vehicle at Sorting

Chemical Etching and Chemical StrengtheningMachine maintenance experience in chemical etching tools (dry etchers, wet benches, plasma etchers)Troubleshoot and repair vacuum systems, RF power supplies, pumps, chillers, and gas delivery systems, mass flow controllersUnderstand and monitor etching process parameters (etch rate, selectivity, uniformity, CD profile).Collaborate with process engineers to resolve process-related issues (under-etch, over-etch,

Knowledge and Skills:​​​​​​Should have worked as Application Engineer in Glue dispensing , Epoxy Dispensing , PU dispensingExposure with Cold Glue dispensing technology for Single Element & Multiple Elements systemIndepth knowledge oF Cold Dispensing, Equipments , Valves ,Pumps , temp control ,Ratio Management ,NeedlesExperience in drafting Glueing Equipement Specification design , Vendor Development &Qualification of Equipmentexperience15

Key Responsibilities: Perform inspection of engine components, assemblies, and work areas as perregulatory and OEM standards. Review work orders, task cards, and documentation for completeness, accuracy,and traceability. Conduct borescope inspections, dimensional checks, and visual inspections ofparts and tools. Monitor and enforce adherence to company quality policies, procedures, andregulatory requirements Identify non-conformities, issue

Responsibilities: Uses judgment based on practice and precedence. Has ability to apply knowledge to resolve issues of moderate scope and complexity using provenapproaches and techniques. No supervisory responsibility but provides informal guidance and support to new team members. Develops understanding of team concepts, soliciting, promoting, and encouraging member’s ideas,goals and efforts. Must be able to exchange ideas and information effectively

Key Responsibilities:                           1. Assembly Line Engineering:                          Design, develop, and optimize automated and semi-automated assembly lines involving screwing, tightening, and glue dispensing operations. Set up and validate torque parameters, screwing profiles, and dispensing paths. Including Leak testing experience                   2. Process Optimization:                           Monitor and improve OEE (Overall

Requirement for 1 resource with SAP Material management skills & JD below. Job Position : IT Admin DeskExperience : 3-5 YearsJob Description:Procure to pay cycle (P2P)IT Budgeting & Demand PlanningGR (Goods receipt)SE (Services Entry)PR (Purchase Requisition)Invoice verification & TrackingClearance Support (E way bill creation), End to end material movement support (IT materials)E-waste Disposal SupportVendor ManagementEnd to End Vedor Co-Ordination for

Electrical engineer with PLC and Robots handling  1. Able to perform PLC,HMI programming and Plc controlled spm machine maintenance ( PLC -Omron , Inovance, Mitsubishi,Delta & Siemens ), HMI ( Omron, Mitsubishi, MCGS, Inovance, Delta ) Knowledge in part transfer mechanisms - Robot maintenance & programming (ABB, Topstar, Fanuc, Epson ) and Pick and place servo controls setting and adjustments3.  Knowlegde in Pneumatics , electrical circuit, servo

Fabrication- AGM/DGMJob Description"This role is responsible for the strategic leadership of manufacturing and projects in fabrication, reporting to the General Manager."Heading and Fabrication unit with indepth understanding of welding procedures and welders qualificationsKey responsibilities include developing production schedules, optimizing resource allocation, and implementing quality control measures. Skills in problem-solving, communication, and

Reports to: GM-FinanceDuties:1. Accounts Payable & PTP Process:● Accurate processing of GRN and Job work invoices.● Accounting for employees' claims, admin bills, and travel bills.● Preparation of the creditor due list and timely payment processing.● Import duties management and import accounting.● Reconcile intercompany transactions.● Handling vendor and internal stakeholder queries efficiently.● Ensuring accurate fixed asset accounting, classification,

Key Responsibilities: Develop and implement OHS&E management systems, policies, and procedures. Ensure compliance with local statutory regulations, ISO standards, and client HSE requirements. Identify hazards, assess risks, and implement effective control measures. Conduct regular site inspections, safety audits, and accident investigations. Provide training, toolbox talks, and awareness programs for employees and subcontractors. Maintain

Job Location -  Virudhachalam, Cuddalore District Minimum Qualifications• Diploma in Packaging/Food Technology• Relevant technical qualificationExperience Required• 5-7 years in packaging operations• 2-3 years in supervisory roleRole Objectives • Manage packaging operations• Ensure packaging quality and efficiency• Minimize packaging wasteKey Responsibilities• Supervise packaging team and equipment• Monitor packaging quality• Material consumption

Technical Skill Set Required• Deep learning (e.g., PyTorch, Tensorflow, Jax, Ray, etc.)• Machine learning APIs.• Experience with Google Cloud Platform (GCP), Microservices and Vertex AI.• Python, API• BigQuery, Cloud SQL & Postgres SQLJob responsibilities• Strong understanding of machine learning and deep learning principles and algorithms.• Experience in developing and implementing generative AI models and algorithms.• Proficiency in programming

Required Knowledge, Skills, and Abilities: Perform on a good experience in computer science topics such as data structures and algorithms.Preferred 3 years of experience with python.Preferred knowledge of hydrographic topics (Geodesy, Surveying and Processing).Professional experience developing software in a team-based setting.Experience testing integrated hardware with stakeholders.Experience presenting in a professional or conference setting.Experience

BACKGROUND/EXPERIENCE:Diploma or Graduates in Civil specializationMinimum of 3 years of related work experienceAuto cad Drawing and structural knowledge experience is essential.Knowledge in Electrical and mechanical is Advantageexperience5

Job Description Desing Experience in any cad toolShould have exp in Modeling, Surfacing 3D modeling 2D Modeling experience13