page 2 - 234 permanent network engineer jobs found for you.

Position : Structural EngineerJob location : BangaloreSalary : 20 LPA  Responsibilites :Overall in charge of the module.Responsible for the design and detailing of the various Primary, Secondary and Tertiary element of the modules.Preparation of the MTO for module in his scope.Preparation of the WCR for module in his scope.Experience in carrying out pre-service (Load out, sea transportation, lifting, launching, on bottom stability), and in-service

Position : Site EngineerJob location : DelhiSalary : 15 LPA Job Description:Will have the following responsibilities:Electrical Design and procurement (Mainly Co-ordination) Erection & Commissioning of the solar power system Project ManagementCo-ordinate with the design team to get all electrical engineering drawings done Managing and Co-ordinating with electrical contractors and technical staff for Technology Selection, System Configuration, Electrical

Role                                                    : Piping Layout EngineerQualification                                       : B.E/B.Tech - MechanicalYears Of Experience                          : 8-15 YearsJob Location                                       : BangaloreJob Description:Area Engineer (AE) shall be able to work for all the activities of Layout Engineer listed above & carry out MTO co-ordination.Shall be responsible for detailed review

Company: a Tier-1 Automotive Company's R&D CenterLocation: BangaloreExperience:5-10 YearsEducation: B.E job description: Required Skills: Strong experience in Embedded C/C++ for STM32 (preferably ARM Cortex-M) Proficient in STM32CubeMX, HAL/LL, and debugging via ST-Link/OpenOCD Good knowledge of CAN bus (frame structure, addressing, filtering) Experience with motor drivers (stepper, BLDC) and control algorithms Familiarity with PCB design and

Job Description:- • Support Project Quality Managers (PQM)• DM in SharePoint (PPAP EOD)• APQP4WIND & PPAP WIND – Support PQM/SQD• Review of Tech doc’s./Quality• NC Support,Quality Engineering, Quality Document management, Project Quality Ass.,experience10

Lead the GCC capabilities in terms of providing solutions and suggesting recommendations onmechanical engineering aspects for all the inquiries received for mechanical equipment -rotatoryfrom various sites. Provide in time and most appropriate solutions / recommendations towards the problems andissues requested by engineering, maintenance and operation teams from various LZ sites. For Rotating Equipment- Continuously build the expertise, knowledge

Conduct Environmental AssessmentsPerform site inspections and environmental impact studies to ensure compliance with regulations and sustainability goals.Develop and Implement Environmental PlansDesign strategies for pollution control, waste management, and eco-friendly practices.Ensure Regulatory ComplianceMonitor projects and operations to ensure adherence to local, state, and federal environmental laws.Collaborate with Cross-Functional TeamsWork with

Job description involves learning technical aspects of products/services, assisting with design and development, participating in testing, supporting production, and collaborating with cross-functional teams.  Key Responsibilities:Assisting with Design and Development: Support the design and development of new products and solutions, potentially using CAD software. Testing and Troubleshooting: Participate in testing and troubleshooting equipment, ensuring

Product portfolio : Hydraulic Pumps & Swing motors, Hydraulic Cylinders for heavy OEM's like Tata hitachi, Volvo, Kobelco, JCB, etc.   Role: working in Assembly lines, Testing, Machining, CMM, Metrology Lab, Washing machine line Shiftsexperience1

Skillsets: Key skills – AML (Anti-Money Laundering), Global or International KYC / CDD (Customer Due Diligence)/ EDD (Enhanced Due Diligence) Work Location – Chennai Work Model – Work from OfficeShift Timing – 5 PM - 2 AM / 6:00 PM to 3:30 AM (Rotational shift based on project requirements). Transport facility will be provided for Night and Morning shiftBenefits – Night shift Allowance (Rs 250 per day) & Free cab facility (Home pick-up and drop)Working

Overall Knowledge of Plant layouts .Experience in Instrumentation requirement in FPSO topside modules / Offshore installationsKnowledge of Piping and Instrumentation Diagram (P&ID)Preparation of Material requisition, Instrument Specifications, Technical Bid Evaluation for Junction Box, Cables, Cable Tray / Duct and MCT.Preparation of Field Instrument Layouts, Cable Tray Layouts, MCT layouts, Preparation of MTO (Material Take-Off).Preparation of Hook up

Position : Design EngineerJob location : DelhiSalary : 15 LPA Job Description:Will have the following responsibilities:Calculations & AC/DC  DesignsUse custom software tools to design PV ground mounted and roof top systems Perform accurate system sizing calculations Create electrical single-line diagrams, panel schedules, connection diagrams for solar electric systems, using computer-aided design (CAD)/ PVsyst software Optimise PVsyst reports for system

Selected Candidates will be responsible for designing quality standards, inspecting materials, equipment, processes, and products, developing quality control systems, and determining corrective actions. You will also work with managers and supervisors to implement quality measures.Developing and implementing quality standards. Developing and implementing quality control systems. Monitoring and analyzing quality performance. Inspecting and testing

• Candidate should be conversant with LV/MV systems such as Gas insulated switchgear, Transformers, reactors,  UPS systems, cable sizing etc.•        Should have relevant experience in making Electrical Design Basis•        Preparing and checking engineering calculations and drawings on project team.•        Support in the preparation of project specifications, requisitions and reports.experience15

Responsibilities:• Develop and design plastic components and systems for automotive and non-automotive applications, considering factors such as performance, aesthetics, manufacturability, and cost-effectiveness.• Create 3D models and detailed engineering drawings using SolidWorks by adhering to design standards and specifications.• Collaborate with cross-functional teams, including product designers, mechanical engineers, tool makers, plastic material

Objective: Technology Docket Collaboration: Work with internal teams to define functional requirements in terms of capacity, scope, features, flexibility, and customer needs, which will serve as inputs for detailed engineering.Engineering Coordination: Coordinate basic and detailed engineering with consultants to ensure comprehensive technology transfer documentation.Design Review: Evaluate detailed engineering designs from consultants for feasibility,

Skills & Competencies: Minimum 5 years relevant experience in shipyard, offshore / Oil & Gas industry in design office.Fluent knowledge of English Language.Knowledge of other languages will be an added advantage.Good technical competency and ability to generate reports.Trained and knowledgeable with relevant Safety and Occupational Health & Safety standards.Should be competent in both manual drawing skills as wells as computer-based application, such as

Company: an Europen MNC's R&D CenterEducation: B.EExperience: 4-8 YearsLocation: Oragadam, Chennai - R&D Center  Job Description:  Minimum of 4+ years of experience in embedded field. At least 2 years of experience required in leading large design efforts andcoordinating project teams. Expertise in Embedded C programming skills. Good knowledge on C++ Programming skills Experience in developing embedded software for various micro controllers.

Bachelor's or Master’s in Computer Science, Information Systems, Data Engineering, or a related field.• 8+ years in IT architecture roles, with at least 3 years focused on data and analytics architecture.• Expertise in cloud-native data platforms (preferably AWS) and technologies such as: AWS tech stack ( S3, Glue,Redshift), Databricks, Snowflake, Power BI, Cloudera Hadoop.• Strong architecture knowledge of data integration, ETL/ELT, data lakehouse

Expertise needed (Mandatory):5 – 8 years’ experience in a product-based organization developing embedded software for Enterprise, Industrial Automation or Service Providers industry.Solid understanding of embedded systems architecture, including microcontrollers, microprocessors, and real-time operating systems.Ability to work on complex modular software systems, algorithms and be able to design, code, debug and automate software.Expertise in C/C++

Experience with ASP.Net, .Net Core, Entity Framework and C# required Strong knowledge with database design and development preferred – SQL/NoSQL DB Experience with Google Cloud and Microsoft Azure preferred Experience with versioning control (GIT) preferred Experience in designing Restful API microservices. Hands-on experience with Apache Airflow for workflow orchestration and Kafka for real-timedata streaming. Experience with CI/CD pipelines using

ResponsibilitiesLead the end-to-end design, architecture, and system integration of avionics and electrical systems for our eVTOL aircraft.Drive the selection, specification, and procurement of avionics hardware and electrical components, working closely with engineering, procurement, and supplier teams.Oversee the development and manufacturing of Electrical Wiring Interconnection Systems (EWIS) and ensure compliance with industry standards.Lead PCB

Responsibilities:·Sales generation, Handling Clients/ Customer of Southern Indian Region of Coimbatore & Chennai area.·• Customer Site Visits for after sales Services (Technical).·• Present products or services in relevant industry that would be beneficial to our client business.·• Plan detailed presentations that show clients our product info, pricing, and benefits.·• Develop products or program suggestions for clients and successfully sell them.·•

Field Quality Engineer Location: Rajasthan.Qualification: B.E/B TechJob Responsibility: Overall responsible for quality work of entire projectpreparing Monthly Quality ReportEnsuring the QA of foundation works, Regular site inspection and issued NCR  if non-compliance of the activity as per given FQPPrepared Root cause analysis, CAPA and issued closure report of NCR.  Taking care of QA/QC documents of the entire project including certificates,

Hiring for MNC Data AnalystNoidaJob Qualifications:Experience Aplenty: 5+ years of hands-on experience in applicable software development environments, showcasing your prowess and ability to excel.Educational Symphony: A Bachelor's degree is strongly preferred, demonstrating your commitment to continuous learning and growth.Tech Savvy:  Should have demonstrated experience in Cloud environments like AWS, GCP, or Azure. Comparable knowledge of tools like

Designation: Senior Engineer – Structural Production Engineering - Global Service CentreBase Location: Navi MumbaiReporting to: GSC Structural Assistant Manager. Role Purpose: Senior Structural Engineer will be responsible for leading assigned structural production engineering projects and to develop production packages for Marine and offshore projects in India in an efficient and quality manner. The responsibility includes mobilizing, directing,

Team handling experience is a must.Need from a service based organization  Competencieso Strong knowledge of networking protocols, security, and systems administration.o Proficiency in virtualization technologies (e.g., VMware, Hyper-V).o Excellent problem-solving and analytical skills.o Strong communication and interpersonal skills.o Ability to work independently and lead IT projects effectively.  Experience Required:o 6+ years of experience in IT

Responsible for smooth Technical Transfer (TT) of customer products & processes to Plant & In-house Product & processes to CMO site/s intended for regulatory submission and/ or for domestic market.•Responsible for execution optimization trials, batch manufacture towards successful execution of TT projects.•Issuing all PM documents to plant on time for execution of commercial batches.•Specification & BOM uploading in ERP.•ERP Simplification.•Technical

Had hands on experience of CAM software like NX OR Espirit2. Must know programing for 3 axis, 5 axis machines as well as for turning centers.3. In-depth knowledge of cutting tools.4. Experience of cutting hard metals like Titanium, Inconel, Nimonic etc.5. In-depth technical knowledge of drawings and specifications to discuss key issues withcustomers, suppliers and internal departments.6. Knowledge of Aerospace and Defense Standard AS9100 D7. Specific

Position Description:As the Engineering Manager, you will lead the existing Engineering team and help build a strongnew team to execute on important and exciting projects in the Product Roadmap.Your duties include hiring and training qualified engineers, setting project timelines forcompletion and helping your team run tests or troubleshoot issues.Our engineering teams practice the Agile/Scrum software development process. Your team willconsist of