80 maintenance engineer jobs found in maharashtra.

Production Engg Optimization: Managing setup, parameter settings, and operation of extrusion machinery (e.g., single/multiple). •           Process Engineering: Develop, analyze, and enhance manufacturing processes to increase productivity, improve product quality, and reduce waste/scrap rates. •           Troubleshooting: Address and resolve critical process, equipment, and part issues on the shop floor, applying root cause analysis (8D,

Dear CandidateWe are hiring Signaling Engineer at Mumbai Location.Roll – Off Roll / ContractualExperience – 3 to 5 yearsKey Responsibilities & Job FunctionsMaintenance & Troubleshooting: Perform regular inspection, maintenance, and repair of signaling gear (points, track circuits, signals) and telecommunication systems.System Operation: Monitor train movements via computer systems and operate controls in an Operating Control Center (OCC) or signal

Job Title: O&M Engineer – Water Supply NetworkLocation: Pune, Maharashtra,Reports To: Project ManagerJob SummarySeeking a skilled O&M Engineer to manage and optimize the city's water supply zone network. Key responsibilities include reducing Non-Revenue Water (NRW), maintaining pressure and LPCD levels, ensuring water quality, and resolving customer complaints efficiently.Key ResponsibilitiesImplement NRW reduction strategies and monitor network

Job Title-Junior Engineering  Reporting Supervisor :  DE / AME JOB PROFILE (E – Essential) Qualification (E)           Diploma /ITIOverall Experience       3 – 5 yearsIndustry Type                IT Company & Manufacturing Company Industry Experience     3-5 yearTechnical Skills (E)      M&E Related Equipment’s, MS Office & Mail communication Generic Skills (E)         Communication, InterpersonalBehaviors                     Achievement level, Team work,

Job Description: The aim of the Service Engineer is to provide with service and technical support to the customers. Develop and maintain regular contacts with customers for long time agreement at all levels. Implement the service plan to increase the customer satisfaction.In this role your responsibilities are:· Execute the service plan effectively· Handle installation/ startup of electric tools· Executing Annual service agreements· Handle Customer

Roles & Responsibilities :The Manager – Manufacturing Engineering / Industrial Engineering will be responsible for the design, development, and implementation of jigs, fixtures, special-purpose machines (SPMs), welding fixtures, assembly fixtures, inspection fixtures , inspection automations, packing automations to improve manufacturing efficiency and quality. The role also requires expertise in industrial engineering methodologies, including time study,

Production Production Planning and Supervision of Production Lines. Production with effective efficiency achievements as per the targets.Manpower Planning allocation on Production Lines. All 3 Shift working in Rotation. Cultured with Discipline and 5 S working. Technical Exposure and working with Tube Bending Machines. Knowledge and working on Welding and Brazing processes.experience9

Key ResponsibilitiesPrepare Electrical GA drawings, SLDs, and tender drawings as per customer specifications and standards.Develop technical offers including electrical BOQs, datasheets, compliance statements, and scope descriptionsInterpret RFQs and electrical requirements to define correct design parameters, load calculations, and panel configurations.Ensure accuracy, quality, and adherence to electrical codes/standards with proper review and version

JD: Deputy Manager / ManagerReporting To: Head-EngineeringLocation: Mumbai-HOAbout Us: Essens Renewable Private Limited (Formerly known as RWE Solar India Private Limited and BELECTRIC Photovoltaic India Private Limited) leads the way photovoltaic power plants are designed, manufactured, installed, operated, and maintained. We take a comprehensive approach to systems integration, design, and installation processes, and building mutually beneficial and

Not Peer Reviewed                                                                                        JOB DESCRIPTION  Job Details Position Title Production Section Incharge     Reporting to Head – Manufacturing  Business Unit  Machine Building Division  Function Manufacturing  Sub-Function  Fabrication / Assembly / Machine Shop    Key Responsibilities Support the Manufacturing in setting and achieving the daily / weekly / monthly objectives for the

1) HSE :Conduct interactive sessions with contractors/contract employee to promote HSE policyEnsure timely closure of safety actions pertaining to incident investigation, SMT tours &safety auditsEnsure that safety procedures are being followed at site2) Resolution of customer complaints :Improve efficiency of emergency response teamEnsure availability of all requisite tools, services and tackles3) Liaise with internal stakeholder :Planning- Provide inputs

PositionEngineer - Product Engineering- ContractLevelExecutiveLocationPuneMandatory SkillsCreo expertisePlastic or Casting design experience is preferredGood To Have skillsbasic of surface design/surface modelling/PLMDFMEA, DFXHiring ManagerVijay NadgeriCompetitors/ Domain companiesAnyExperienceBachelor of Engineering degree with min. 1-4 years of relevant experienceDiploma with min. 4-5 years of relevant

1. Conduct time & motion studies, line balancing, and capacity analysis.                                                                                                                     2. Analyse and improve manufacturing and service processes for higher productivity and efficiency.                                                                                                                      3. Optimize manpower, layout, material flow, and space

Roles & Responsibilities:1) BOM creation in PLM. (Items, parts lists, non-CAD objects etc.)2) Metadata corrections/update in PLM.3) CAD enrichment (3D modelling, assembly, i-assemblies)4) 3D and BOM comparison.5) CAD try-outs in Inventor.6) Change management in Enovia.7) Variant management in Enovia.8) Communicate with overseas teams on a regular basis.9) Maintain planning and status sheets.10) Estimate amount of efforts required for a task.11) Attend

Job Responsibilities:1. Creating High-Quality Content for Various AI Models:○ Develop conversational prompts and responses.○ Create generative prompts and responses.○ Write description prompts.○ Provide detailed descriptions of videos with or without audio.○ Summarize video content.○ Generate image captions.○ Create video event captions.2. Evaluating Human or AI-Generated Prompt-Response Pairs:○ Score prompt-response pairs on multiple parameters and

Bachelor’s or Master’s degree in Mechanical, Chemical, or SystemsEngineering (Ph.D. preferred). Minimum 15 years of progressive engineering experience, including atleast 5 years in a leadership capacity. Proven track record in model-based design (MATLAB/Simulink, SysML, orequivalent) and 3D modeling (SolidWorks, CATIA, or similar). Hands-on experience in manufacturing, system integration, and productscale-up—from pilot to commercial deployment. Strong

Business Plan & Budget:► Prepare monthly & annual plan of controlled area► Provide budget inputs of controlled area to ZIC for preparation of zonal budget2) Technical Evaluation of site:► Technical feasibility of proposed Network (PE and Steel)► Provide report on planned potential vis a vis proposed Network► Coordinate with O&M, AI & HSE to visit and review the critical cases► Prepare MOC if any required for the site► Coordinate with planning department

JOB DESCRIPTION Position TitleStructural Senior EngineerDivision / DepartmentStructural Analysis/ StructuresLocationPuneDate (written on)Feb 2024 JOB PURPOSETo manage the assigned structural engineering scope in a project as per schedule with requisite quality. COMPANY OVERVIEW OneSubsea is a division of Schlumberger Limited, a multinational oilfield services company. OneSubsea specializes in providing integrated solutions, products, systems, and services

Key Responsibilities: System &  Layout Design Review and optimize system layouts during sales and engineering phases mainly using Revit. Create basic Revit models using functional design inputs. Integrate safety, ergonomics, and accessibility into layouts. Coordinate interfaces with buildings, operators, equipment, and procurement.3D Modeling, 2D Drafting & Documentation Create and manage 3D conveyor models in Revit based on design inputs and extract

Role Responsibilities• Performing and verifying designs using first principles calculations, FEA and/or current best practice engineering methods• Ensuring designs are compliant with relevant Australian Standards, statutory requirements, client specifications, and Safety in Design philosophy• Ensure the technical aspects of projects are run smoothly and efficiently. Work closely with designers and project managers to maintain proper documentation to

Create 3D models, assemblies, and layouts using SolidWorksDevelop 2D manufacturing drawings with GD&T, tolerances, and annotationsDesign mechanical components, weldments, sheet metal parts, and assembliesPrepare BOMs and support cost optimization and manufacturabilityModify and optimize existing designs based on feedback and testingCoordinate with electrical, controls, and manufacturing teamsEnsure designs comply with DFM/DFA principles and industry

Key Responsibilities of the QSE1. Review of Supplier Documentation (70% of Time)Review pre-verification documents such as SMDL (Supplier Master Document List), ITP (Inspection and Test Plan), and Procedures received from the Supplier.Review verification documents against requirements from the PO (Purchase Order), Project/Client specifications, Material specifications, product specific requirements,and applicable codes & standards.Create a COM document in

Job Description for EOT Cranes Design Engineer (Team MemberDesign)Grades P1.1 & P1.21. Perform design calculation of engineering components2. Worked in Design of ELL Cranes , Stacker reclaimers, Vibratingfeeder , Vibrating Screens, Port Equipments, Anode furnace ,Galvanising line , colour coating lines etc.2.Develop and modify 3d models and assembly drawings usingcomputer-aided design (cad) software.(Hands on experience inAutocad ( 2D) Solidworks /3D

Major responsibilities: ● RCA for Inhouse & field rejection. ● Attending customer complaints with customer QA and preparing appropriate CAPA reports. ● Implementing corrective actions to avoid warranty failure.  Managerial Skills and Experience: ● Good written and verbal communication skills. ● Ability to work with a cross-functional team. ● Sense of ownership and urgency when working in the company.  Experience: ● 6-8 years’ experience in Process Setup

Preferred Qualifications and Experience: Bachelor’s degree in Packaging Engineering 0–3 years of experience in packaging design or engineering Familiarity with CAD software e.g., SolidWorks, Creo, Artios CAD Basic understanding of packaging materials (plastics, paperboard, corrugate, etc.) Strong analytical and problem-solving skills Good communication and teamwork abilities Key job functions / Highlights of Job Description:  Create detailed CAD

Job Description1. Project Leadership & Management (70%)Scope & Control: Lead project scope definition and manage Change Requests for custom design projects.Planning: Develop Gantt charts, schedules, and resource matrices from design to field implementation.Financials: Own project budgets, forecast resource needs, and manage vendor quotations.Risk Management: Mitigate technical, cost, and safety risks, ensuring minimal impact on customer fabrication

Key Responsibilities- Design and optimize plastic components for injection molding- Apply DFM/DFA principles to reduce cost and improve quality- Develop 3D CAD models, drawings, and GD&T- Collaborate with global mold makers and suppliers- Support mold trials, tooling reviews, and production ramp-up- Troubleshoot injection molding defects- Coordinate with international teams across multiple locationsRequired Qualifications- Bachelor’s or Master’s degree in

Job Title: Sr. Sales EngineerLocation: AurangabadTravel: 80–85% (Field-based)Reporting to: Regional Sales ManagerThe RoleWe are looking for a results-driven Sr. Sales Engineer to manage and grow our industrial components business in the territory. You will be responsible for the entire sales lifecycle—from prospecting and technical solutioning to negotiations and payment collection.Key ResponsibilitiesSales & Growth: Achieve targets for sales volume,

Key Responsibilities➢ Conduct supplier audits in line with Group standards.➢ Manage supplier qualification based on Group audit requirements.➢ Monitor and follow up on quality action plans related to India localization and Group projects.➢ Provide support to Group supplier quality projects.➢ Contribute to supplier quality risk mitigation within the purchasing plan. Technical Skills➢ Proven experience in quality management, with strong process auditing

Sourcing and Purchase Requisition analyst  Industry - Service IndustryLocation - Mumbai Purchase Requisition (PR) Support Review submitted PRs in the ERP/e-procurement system; ensure correct vendor, item/service descriptions, pricing, GL coding, cost center and approval routing.Track PR approvals, follow up with requesters/approvers to resolve queries and expedite approvals.Close or cancel PRs as required (partial/complete closure), ensuring appropriate