32 maintenance engineer jobs found in chennai.

Job Duties/Responsibilities may include, but are not limited to:Design/Develop Electrical Wiring harness for various Genset, Engine.Get involved and contribute in system level architecture, electrical system/subsystemGet involved and contribute in new component development and sub processes.Perform needs electrical analysis and initiate ideasEvaluate new products, processes, or systemsCommunicate results to customers, suppliers, team members, and other

Job PurposeThe primary objective of this role within the Engineering department is to provide global technical support to enhance the operational reliability of wind farm assets. You will analyze engineering and business data to develop predictive maintenance strategies aimed at preventing turbine component failures and optimizing machine uptime.Key Accountabilities & Responsibilities Predictive Maintenance Engineering: Track technical incidents across

Service Engineer (PLC/SCADA) - ContractWe are seeking a proactive and skilled Service Engineer with expertise in PLC programming, SCADA systems, and HMI development to join our team on a contract basis in Chennai, Tamil Nadu. This is an excellent opportunity for an experienced professional to contribute to critical projects within a dynamic environment.Responsibilities:Perform PLC programming, configuration, and troubleshooting for various industrial

Must have competencies:Technical Skills 5-10 years of experience in software development using C++ programming language.Classified as Business Experience in preparing software architecture, design for the development of softwareproducts. Ability to create and/or read and interpret, the architecture and design diagrams. Experience in Software Development using Agile Scrum methodology. Excellent debugging skills. Excellent analytical skills and

Key Responsibilities:1. Monitor, Investigate and resolve Process issues  2. Own and lead Productivity improvement.3. Create rolling capacity forecast and action plan to meet the demand4. Lead Value stream mapping (VSM /MIFA) process for the value stream5. Carryout periodic cycle time study and capacity revisit6. Identify & lead process automation/ I4.0 projects7. Carryout periodic shopfloor audit to ensure process standards 8. Create, review periodically

Lead and mentor a team of production supervisors, and operators.Develop and implement strategies for optimizing production operations and achieving business objectives.Drive a culture of continuous improvement, safety, and operational excellence.Set performance targets for production staff and monitor progress through KPIs.Manage production schedules and resource allocation to ensure timely delivery of products.Conduct regular audits of production

Job ScopeThe candidate will serve as the principal contributor for transmission system modeling and detailing within the Drivetrain India team, ensuring high standards of modeling and drawing quality. This role may be designated as “Transmission Modeler/Detailer”. The position requires demonstrated expertise in advanced surface casting modeling and handling complex group-level assemblies.Key Duties and Responsibilities Perform modeling and detailing of

Job Title: Engineering - Specialized - Packaging Design Engineer  Job Description: This position designs and develops returnable and expendable packaging for individual piece parts and bulk shipping.  Proper packaging design includes part containment, protection, and optimization of transportation and other supply chain functions.  Key Responsibilities:- Develop packaging solutions to protect finished painted components.- Collaborate with suppliers to

3–5 years in technical support, QA, or software operations.Hands-on experience with AI tools for automation, testing, or data analysis (e.g., ChatGPT API, Make.com, Zapier, Freshdesk AI Assist).Strong diagnostic skills in web applications (.NET / Azure environment preferred).Understanding of testing frameworks and bug-tracking systems (GitHub, Azure DevOps, JIRA).Comfortable creating and refining AI prompts, test automation scripts, and structured

Strong knowledge of EPDM rubber properties, compounding behaviour, and testingmethods. Hands-on experience with lab instruments: Mooney Viscometer, Rheometer, TensileTester, Hardness Tester, Specific Gravity Tester, Compression Set Apparatus, etc. Good understanding of ASTM / ISO testing standards for rubber materials. Analytical thinking, precision, and problem-solving skills. Familiarity with quality systems like IATF 16949, ISO 9001, ISO 14001.

As a Senior Software Engineer, you’ll be responsible for designing and delivering optimized, reliable backend components in C++. You’ll engage with global teams to ensure smooth collaboration and delivery. Responsibilities:• Build and optimize high-performance backend systems• Write clean, modular, testable C++ code• Participate in cross-team reviews, planning, and troubleshooting• Collaborate across regions to support global product goals Requirements:•

As a Senior Software Engineer, you’ll be responsible for designing and delivering optimized, reliable backend components in C++. You’ll engage with global teams to ensure smooth collaboration and delivery. Responsibilities:• Build and optimize high-performance backend systems• Write clean, modular, testable C++ code• Participate in cross-team reviews, planning, and troubleshooting• Collaborate across regions to support global product goals Requirements:•

Experience:6+ years of professional software development experience.3+ years of hands-on experience with Microsoft Azure services, including:Data & Storage: Azure SQL, Cosmos DB, Azure StorageCompute & App Hosting: Azure App Services, Azure Functions, Azure Kubernetes Service (AKS)Security & Monitoring: Azure Key Vault, Azure Monitor, Application Insights Technical Skills:Strong backend development expertise in Python, Node.js, or Go.Proficiency in Python

- Position: Sr. Engineer Production (2 vacancies)-- Experience: Minimum 2 years of mandatory VTL machine experience within a machine shop.- Responsibilities: Managing a team of 35 members per shift; shift work is required.experience6

Key ResponsibilitiesProduct Development: Create detailed 3D models and 2D technical drawings for new products and hardware components using CAD software.Prototyping & Testing: Build physical prototypes (via 3D printing, CNC, etc.) and conduct rigorous testing to validate mechanical integrity, fit, and finish.DFM/DFA: Apply Design for Manufacturing and Assembly principles to ensure products can be produced efficiently at scale with minimal waste.Material

Derive the production plan for the factory, sharing it internally.Analyse different scenarios & make changes in production planning & align with master schedule.Assure that the WO for next 8 weeks is updated in the system, and coordinate with Logistic of PM/EPC and MM for every change required during those 8 weeks.Follow the production advancement, elaborate catch-up plan, and adjust schedules in case of delays.Launching of material request to the

Design, deploy, and maintain Layer 2/Layer 3 network infrastructure using Cisco Catalyst/Nexus, Aruba, and Ruckus switching platforms. Configure and optimize dynamic routing protocols such as OSPF, BGP, and EIGRP across multi-site environments. Implement and manage firewall policies, NAT rules, and VPN configurations on Fortinet FortiGate and Check Point firewalls. Perform network segmentation using VLANs, ACLs, and trunking to ensure secure and efficient

Required Technical SkillsMES & RockwellStrong hands-on experience with:Rockwell FactoryTalk ProductionCentre (FTPC)Modular FrameworkExperience with MES installation, upgrades, and lifecycle supportUnderstanding of ISA‑95 and manufacturing system architectures Software DevelopmentStrong proficiency in:JavaJavaScriptReactJSSQLHTML / CSSPNUTSExperience developing and consuming RESTful web servicesDevOps & Modern Engineering PracticesExperience with DevOps

Technical Skills: 12+ years of experience in  Power Electronics drives product development using C++ programming language.Experience in communication protocol development – PROFINET, EtherNET/IP, EtherCAT, BACnet/IP, MODBUS TCP, POWERLINK, PROFIBUS DP, DeviceNet, CANopen, BACnet MS/TP, Modbus RTU, Metasys N2, LonWorks, AK-LonWorks, ASi Bus, Interbus, PROFISAFE, OPC DA, OPC UA, IEC101, IEC103, IEC104, IEC61850, DNP3.Ability to lead a development team of 5

Engineer / Sr. Engineer – Order ManagementWe are seeking a highly motivated and detail-oriented Engineer / Sr. Engineer to join our Project Management team in Chennai. The ideal candidate will play a crucial role in managing the order management process from contract review to project completion, ensuring timely and successful delivery.Responsibilities: Review and understand contract and project documents to ensure all requirements are captured.

Job Title: Lead Piping Engineer (Revit) Key Skills:Autodesk Revit (Piping)Piping layouts, Isometrics, GA & Spool drawingsP&ID interpretationPipe supports & multi-disciplinary coordinationKnowledge of ASME / project standardsExperience in EPC / Oil & Gas / Process / Industrial plantsQualification:B.E / B.Tech – Mechanical or Diploma in MechanicalLocation:Bangalore / Chennai (Hybrid working flexibility)Key Responsibilities: Strong expertise in Autodesk

Bachelor's degree in Computer Science, Engineering, or a related field.10+ years of Experience.Experience of around 4-6 years of relevant experience in Testing Center of Excellence.A firm understanding of Digital, Mobile and Data automation.The ability to develop strategies, test plans, and test cases around Legacy and NextGen technologies (Mobile, React, etc.).Exceptional programming skills in one or more than one languages – JAVA, Python.Ability to

Role OverviewWe are seeking a high-caliber Senior Production Manager to lead our heavy machinery machine shop. This is a critical leadership role responsible for overseeing high-precision manufacturing processes, including large-scale CNC machining, Horizontal Machining Centers (HVM), and Vertical Machining Centers (VMC).The ideal candidate will bring a deep technical understanding of heavy-duty component fabrication and a proven track record of managing

Responsibilities:Prepare detailed cost estimates, budgets, and tender documentation.Draft and manage contracts, subcontracts, and contractual correspondence.Lead procurement, supplier negotiations, and contractor agreements.Monitor project costs, variations, and cash flow.Apply digital tools, process, Excel, and AI systems to improve QS processes.Requirements:7+ years’ QS experience, ideally within luxury residential projects.Strong knowledge of

6–8 years of experience in roles such as Business Process Associate, Business Analyst, or Scrum Master.Experience in Cloud Architecture, cloud application administration (AWS/Azure/Oracle).Proven experience in eliciting end-user requirements and mapping 'As-Is' and 'To-Be' processes.Exceptional articulation, problem-solving, communication, and presentation skills.Proficiency in Visio, MS Office tools, ServiceNow, and other relevant platforms.Experience

Sales Manager - Decanter Sales (Industrial & Municipal) - ChennaiJob Title: Sales Manager - DecanterDepartment: Sales & MarketingLocation: ChennaiReports To: Head Of The DepartmentEmployment Type: PermanentAbout the Company:  globally leading supplier of plants, equipment, and services for hydropower stations, the pulp and paper industry, the metalworking and steel industries, and for solid/liquid separation in the municipal and industrial sectors as well

3+ years of hands-on experience in Appian developmentStrong experience with SAIL UI, Process Models, Records, Expressions, and ReportsExperience in Appian integrations using REST APIs, Web Services, and databasesGood understanding of BPM concepts and workflow automationWorking knowledge of SQL and relational databasesExperience with version control tools and Appian deployment processesFamiliarity with Agile/Scrum methodologiesStrong problem-solving and

Architect – High-End ResidentialFor over 23 years, we have delivered landmark residential projects across the globe.We are seeking a highly skilled  Architect to join our growing international team, withstrong technical expertise and experience in luxury residential projects.Responsibilities Prepare detailed technical drawing packages with precision (using Revit andAutoCAd)  Design bespoke joinery, kitchens, bathrooms, and interior architecture

Key Responsibilities Ensure incoming data requests are properly evaluated, prepared, and delivered in atimely and accurate fashion. Explore ways to improve our internal data delivery processes, data cleaning and dataquality. Query complex data structures and manipulate data tables to fit bespoke clientrequests. Working directly with our customers to ensure that defined SLAs are met. Collaborate with our data teams to implement efficient and automated

Job Requirements Administrative SupportMail & Courier Logistics: Manage incoming and outgoing mail, packages, and couriers; maintain logs and ensure timely distribution.Meeting Room Management: Coordinate and schedule meeting rooms, ensuring they are tidy and properly equipped before presentations or client visits.Office Supplies: Monitor and manage inventory for office supplies and front-desk stationery, placing orders when necessary.Data Maintenance: