page 6 - 204 permanent maintenance technician jobs found for you.

1. Job Purpose Overview:The Design Engineer will work at the HO pune, focusing on product improvementbased on current production & field issues. He will be also responsible to provideresolutions/ suggestions over current product & process issues. This role will closelycoordinate with the production team at Goa and the design team at the head office inPune to ensure smooth alignment between design and production requirements. 2. Key Responsibilities

7-11 years' experience in Mechanical engineering within a MEP Consultancy environment.Indian project experience is preferred in Highrise and Aviation Experience in concept design to tender detailing, client managementGood understanding on the HVAC, PHE, FPS and system design related to Building environmentAbility to accept a high degree of responsibility in a team-based organisation, combined with ability to work independently. Broad building design

JOB RESPONSIBILITY :- Process Datasheet for Equipment & Instrument (PDS)- Block Flow Diagram (BFD)- Process Flow Diagram (PFD)- Piping & Instrumentation Diagram (P&ID)- Basic Engineering Packages (BEP)- Capital & Operating Expenditure (Capex & Opex)- Heat, Mass & Energy Balance- Utility Calculations- Hazard & Operability Study (HAZOP)- Batch Size, Time Cycle and Hydraulic Calculations- Equipment Mapping and Line Sizing- Debottlenecking- Process Safety

Position : Mechanical EngineerJob location : Coimbatore Responsibilities : 1. Study and understand the pressure vessel scope of work and quickly become conversant to procedures and standards.2. Prepares Pressure Vessel Design Basis, Data sheet and Mechanical calculations based on applicable Codes and client specifications including agreed exceptions.3. Review sub-supplier calculations and drawings to ensure compliance with client specifications or

Job Title: Mechanical Design Engineer Experience : 2 to 3 Years Location : Coimbatore  Roles & Responsibilities : Qualification : Btech Mechanical Preferred : M.E/M. Tech in Design/CADCAM/Thermal/Heat & Mass Transfer/Tribology/Fluid mechanics/Applied mechanics Job Description :  The Product Development/subsystems engineer is responsible for designing new parts, subsystems and their integration into products.  This includes concept development, design,

Interested candidates may apply to nirmal.s@randstad@randstad.co.inYour next roleCarry out detailed engineering design for piped water supply and both above and below ground drainage, including the preparation of layouts, schematics, and details.Perform engineering design for public health and fire protection services, which involves preparing layouts, schematics, schedules, specifications, and details.Draft technical schedules and specifications.Ensure

Experience and Education: Bachelor of Engineering degree in Electrical Engineering, Mechanical Engineering, Manufacturing Engineering, or related field.Minimum 7 years of hands-on experience with industrial laser micromachining systems, vision-guided automation, and multi-axis motion control.Experience in Laser: Nd:YAG, CO₂, Fiber, UV, Ultrashort pulse (USP) lasers; beam shaping and delivery optics, Motion: Experience with motion controllers (Aerotech,

Job Description:- Provide technical support remotely for main converters of variety of suppliers in service Interdisciplinary project work as technical expert to improve the fleet reliability.Be a leading example in maintaining high standards of HSE and quality.Prepare and verify technical documentation.Representing Service interest again suppliers.Advancement of main converter trainings Troubleshooting of complex failures / areas and also be responsible

§Bachelor’s or Master’s degree in Mechanical Engineering, Materials Science, Manufacturing Engineering, or a related field §8 to 10 years of hands-on experience with CNC machines related to ceramic ,GlassExposure to green field projectsExperience in Ceramics , Glass CNC process Should have designed process to achieve desired finish though CNC process Indepth knowledge of CNC configurations for different Material to be machines example Ceramics , GlassCNC

Location- Hyderabad Key Responsibilities:Lead customer-facing activities, aftermarket sales, service, and engineering for Rail & Marine.Full P&L accountability.Build strong customer relationships and develop a 5-year strategic plan for India.Lead, mentor, and manage sales, service, and engineering teams, focusing on building a robust engineering team in IndiaDrive cost reduction, localization, and achieve regional performance targets. Qualifications &

Dear Candidate, We are hiring Mechanical Design Engineers for one of our client.  Work Location: - Mumbai Job Description Undertaking detailed mechanical engineering design Preparing technical schedules. Planning and managing CAD documentation of design work. Monitoring performance of Technician (as appropriate). Under guidance of senior staff, representing Buro Happold at meetings with the client, other professionals and suppliers. Ensuring service and

Job Description: Position: Lead engineer Instrumentation & Control designLocation: BengaluruEducation Qualification: Candidate should be B.E/B. Tech in Instrumentation / Electronics / Electrical & Electronics Engineering Requirement:· Should 8 - 12 years hands on technical design experience & handling Instrumentation & control design for Oil & Gas industry· Good in understanding & build technical design of P&ID, etc., development of standardized

Location: Chennai (HQ)/ Hyderabad (Reg Office)/ Bangalore (Remote)/ Pune (Remote) Responsibilities: Primary responsibilities:❖ Must have Strong knowledge of automation technologies and trends in the industry.❖ Strong concept design capability, ideally in life science assembly or high-speed packaging background.❖ Complex mechanism design (high-speed servo pick and place systems, robotics).❖ Knowledge of asynchronous & synchronous transport systems.❖

> Manage and evaluate machine resources to ensure productivity and minimal downtime     > Strive to reduce expenses and increase productivity across all product lines     > Ensure all employees follow industry standard health and safety guidelines     > Set ambitious production goals and communicate them to key personnel     > Provide motivation, support, and guidance to all employees      > Communicate any problems or obstacles to senior management     >

Key Responsibilities Spearhead and contribute to the mechanical design and NPI efforts for electric motor products, ensuring performance, manufacturability, and reliability.Collaborate closely with cross-functional engineering teams (electrical, manufacturing, systems) to deliver integrated solutions that align with customer requirements.Serve as a key liaison with customers, suppliers, and international partners, supporting technical discussions, project

Position : Service EngineerJob lcoation : Delhi Responsibilites : 1. Handling customer service calls & maintain the record for service calls2. Perform supervision of erection & commissioning of pumps3. Perform servicing of pumps at site for warranty/paid jobs4. Analyse root cause & take corrective actions5. Preparing detailed service analysis report for customer submission6. Perform routine inspections, preventive maintenance, and emergency repairs.7.

Department      Engineering (CNC)        S.No    Experience and Education:        1    Bachelor of Engineering degree in Mechanical Engineering, Manufacturing Engineering, or related field.        2    Minimum 7 years of experience in CNC Programming, VMC or HMC (Fanuc / Siemens Controller), Precision Machining and hands on experience with Optimizing cutting speed (Vc), feed rate (f), depth of cut (ap, ae) for tool life vs productivity in a Manufacturing

Job Title: Design Engineer - Mechanical Location: Bengaluru Department: Engineering / Mechanical Systems Reports To: Principal Engineer  Job Type: Full-Time Job Summary: We are seeking a skilled and Innovative Mechanical Design Engineer to join our engineering team. The ideal  candidate will be responsible for the Designing, Developing, and improving mechanical systems, components  and products that meets functional, cost, quality and safety requirements

Position : Process Design EngineerJob location : Coimbatore Experience : • 10+ years O&G Industry experience• Prior work experience in EPCs, Engineering Consultancies, Production Facility Engineering, Site Engineering support for Pre-commissioning, Commissioning activities• Deep understanding of process engineering concepts and strongly familiarized with international industry standards.• Thorough process engineering knowledge with strong Engineering

Profile Details : To lead quality operations for CAR-T manufacturing.This position will act as the central QA authority for CAR-T product approvals across multiple point-of-care centers (POC’s) in India. The role does not involve significant travel but requires strong collaborations with manufacturing and quality teams of POC’s.Key ResponsibilitiesServe as the central decision-making point for CAR-T product release across Indian sites(POC’s).Develop,

Position opening: Design EngineerExperience: 5 Mini – 8 MaxQualification: B. E/ M.E in Mechanical Engineering, or Marine Engineer.Job descriptionResponsible for making design work, focusing on price-optimized and technically good solutions. Ensure uniformity across the customer teams and towardsproduction.Main Responsibilities• Create CAD design in 3D and 2D• Create Purchase Specifications and communicate with suppliers• Review of Design and documents•

Lead the GCC capabilities in terms of providing solutions and suggesting recommendations onmechanical engineering aspects for all the inquiries received for mechanical equipment -rotatoryfrom various sites. Provide in time and most appropriate solutions / recommendations towards the problems andissues requested by engineering, maintenance and operation teams from various LZ sites. For Rotating Equipment- Continuously build the expertise, knowledge

Position : Lead Engineering - Large PumpsJob location : Chennai Roles & Responsibilities : • Development and design of hydraulic flow machines with a focus on large pumps and turbines.• Understanding and interpreting hydraulic designs of pumps.• Responsible for problem-solving in the field of machine design.• Design and optimization of machine components.• Creation of manufacturing documents.• Technological and manufacturing clarifications with customers

Position Title : Fixture Tool Design EngineerWork Location Kothur - HyderabadFunction:  Designing and Drafting  Roles and Responsibilities :  To conduct feasibility study for new enquiries Part to be convert in process - Concept fixturing Communicate progress on tasks to direct supervisor Create detailed 3D/2D designs & drawings for Fix & part Produce detailed drawings & BOM to update in SAP Ensure our designs meet standard & selected Tool design Strong

Position : Principle Engineer - ProcessJob location : Gurgaon Key Responsibilities : Lead end-to-end process design, scale-up, optimization, and troubleshooting for critical manufacturing and production operations.  Drive and manage technology transfer activities, including process handover from R&D to Manufacturing, site-to-site transfers, and external partnerships—ensuring seamless knowledge, documentation, and process transfer  Act as the technical

Position: Factory HeadLevel: Deputy GM/GMFactory Head is responsible for implementing manufacturing strategy and strategic operational goals by overseeing all aspects of a factory operations including; planning, supply chain, scheduling, quality control, safety compliance, manpower management, maintenance, and ensuring efficient production while meeting quality standards and delivery deadlines. He/she will lead teams, manage budgets, and collaborate with

Job Description:      Work Experience : 4 to 8  yearsLOCATION:  Chennai, TN, IN DEPARTMENT:  Engineering YOUR TASKS:As a member of our international team, you take over several development tasks for our electrical pitch and yaw systems. Each system consists of different numbers of frequency converters and motors as well as an energy storage system in case of the pitch system. In detail, this includes among others the following tasks:     Development of

Key ResponsibilitiesProduction & Fabrication:Supervise the fabrication and mechanical assembly of batching plant structures as per production schedules.Ensure adherence to approved drawings, welding procedures, and fabrication standards.Monitor activities such as cutting, fitting, welding, and bolting for modular components.Coordinate with PPC for workflow scheduling and material availability.Ensure stage-wise and final inspection compliance.Process

A leading engineering company Designation: Engineer / Supervisor – Tool Quality Location: Hyderabad Experience: 5-10 years Qualification: Diploma/ B Tech (Mechanical) Responsibilities:  All tool parts with operation-wise inspection and patrolling inspection. Hardness checking of cutting elements. Calibration of instruments before the due date was maintained. Maintaining calibration certificates for measuring instruments. Non-confirmation report for

Should conversant with operation and maintenance of utility equipment's like chillers, compressors, steam boilers, thermic fluid heaters, Nitrogen plants, etc.…● Should conversant with installation, commissioning, operation and maintenance of process field instruments like control valves, safety valves, flow, level, temperature, pressure, mass flow measurement and controlling instruments.● Candidate having experience of DTY Machines, POY Machines, FDY