page 2 - 59 technicians and engineers -industry and mechanical engineering jobs found for you.

JOB RESPONSIBILITY :- Process Datasheet for Equipment & Instrument (PDS)- Block Flow Diagram (BFD)- Process Flow Diagram (PFD)- Piping & Instrumentation Diagram (P&ID)- Basic Engineering Packages (BEP)- Capital & Operating Expenditure (Capex & Opex)- Heat, Mass & Energy Balance- Utility Calculations- Hazard & Operability Study (HAZOP)- Batch Size, Time Cycle and Hydraulic Calculations- Equipment Mapping and Line Sizing- Debottlenecking- Process Safety

Job Title: Mechanical Design Engineer Experience : 2 to 3 Years Location : Coimbatore  Roles & Responsibilities : Qualification : Btech Mechanical Preferred : M.E/M. Tech in Design/CADCAM/Thermal/Heat & Mass Transfer/Tribology/Fluid mechanics/Applied mechanics Job Description :  The Product Development/subsystems engineer is responsible for designing new parts, subsystems and their integration into products.  This includes concept development, design,

Key Responsibilities Spearhead and contribute to the mechanical design and NPI efforts for electric motor products, ensuring performance, manufacturability, and reliability.Collaborate closely with cross-functional engineering teams (electrical, manufacturing, systems) to deliver integrated solutions that align with customer requirements.Serve as a key liaison with customers, suppliers, and international partners, supporting technical discussions, project

Key Responsibilities: System &  Layout Design Review and optimize system layouts during sales and engineering phases mainly using Revit. Create basic Revit models using functional design inputs. Integrate safety, ergonomics, and accessibility into layouts. Coordinate interfaces with buildings, operators, equipment, and procurement.3D Modeling, 2D Drafting & Documentation Create and manage 3D conveyor models in Revit based on design inputs and extract

Location: Chennai (HQ)/ Hyderabad (Reg Office)/ Bangalore (Remote)/ Pune (Remote) Responsibilities: Primary responsibilities:❖ Must have Strong knowledge of automation technologies and trends in the industry.❖ Strong concept design capability, ideally in life science assembly or high-speed packaging background.❖ Complex mechanism design (high-speed servo pick and place systems, robotics).❖ Knowledge of asynchronous & synchronous transport systems.❖

Position Title : Fixture Tool Design EngineerWork Location Kothur - HyderabadFunction:  Designing and Drafting  Roles and Responsibilities :  To conduct feasibility study for new enquiries Part to be convert in process - Concept fixturing Communicate progress on tasks to direct supervisor Create detailed 3D/2D designs & drawings for Fix & part Produce detailed drawings & BOM to update in SAP Ensure our designs meet standard & selected Tool design Strong

Interested candidates may apply to nirmal.s@randstad@randstad.co.inYour next roleCarry out detailed engineering design for piped water supply and both above and below ground drainage, including the preparation of layouts, schematics, and details.Perform engineering design for public health and fire protection services, which involves preparing layouts, schematics, schedules, specifications, and details.Draft technical schedules and specifications.Ensure

Title: Process Engineer / Material Handling & Grinding Qualification : BE Chemical / Msc or Bsc in Chemistry Minimum Experience of 5-8 Years Location : Sankrail , West Bengal. Roles and Responsibilities : The Process Engineer Material Handling is responsible for the operation, maintenance, and optimization of electrical systems and equipment used in material handling processes (e.g., belt conveyors, screw conveyors, stackers, reclaimers, bucket elevators)

About the Company:Stäubli is a global mechatronics solution provider with four dedicated Divisions: ElectricalConnectors, Fluid Connectors, Robotics and Textile, serving customers who want to increasetheir productivity in many industrial sectors. We are an international group that currentlyoperates in 29 countries, with agents in 50 countries on four continents. Our globalworkforce of 5700 shares a commitment to partnering with customers in nearly

Dear Candidate, We are hiring Mechanical Design Engineers for one of our client.  Work Location: - Mumbai Job Description Undertaking detailed mechanical engineering design Preparing technical schedules. Planning and managing CAD documentation of design work. Monitoring performance of Technician (as appropriate). Under guidance of senior staff, representing Buro Happold at meetings with the client, other professionals and suppliers. Ensuring service and

Job Description:- Provide technical support remotely for main converters of variety of suppliers in service Interdisciplinary project work as technical expert to improve the fleet reliability.Be a leading example in maintaining high standards of HSE and quality.Prepare and verify technical documentation.Representing Service interest again suppliers.Advancement of main converter trainings Troubleshooting of complex failures / areas and also be responsible

Job Title: Mechanical Trainee EngineerDepartment: Maintenance / EngineeringLocation: Bonthapalle Sangareddy districtInterested candidates may apply to nirmal.s@randsatd.co.in Key Responsibilities:1. Engineering Maintenance ActivitiesAssist in daily execution and troubleshooting of mechanical maintenance tasks as per plan.Support planning and execution of calibrations for mechanical instruments and equipment.Prepare and maintain reports including

7-11 years' experience in Mechanical engineering within a MEP Consultancy environment.Indian project experience is preferred in Highrise and Aviation Experience in concept design to tender detailing, client managementGood understanding on the HVAC, PHE, FPS and system design related to Building environmentAbility to accept a high degree of responsibility in a team-based organisation, combined with ability to work independently. Broad building design

Job purpose (Describe 1-2 sentence about the main purpose of the job)Our responsibility is to provide global support to improve the operational efficiency of all wind farms around the clock. We are committed to maintaining high quality standards through continuous wind farm troubleshooting and service.   Key accountabilities / Responsibilities: Detailed descriptions of the key areas of responsibility and decisions made by this position.·         Open to

A leading engineering company Designation: Engineer / Supervisor – Tool Quality Location: Hyderabad Experience: 5-10 years Qualification: Diploma/ B Tech (Mechanical) Responsibilities:  All tool parts with operation-wise inspection and patrolling inspection. Hardness checking of cutting elements. Calibration of instruments before the due date was maintained. Maintaining calibration certificates for measuring instruments. Non-confirmation report for

● Should have well knowledge about Utility Operations● Should have knowledge of use of PPE's, fire extinguishing & Work Permit● Should have basic knowledge of IMS system● Should have knowledge of legal requirement of Utility’s equipment’s● Should understand functional safety, ensuring compliance with relevant health and safety regulations and quality standard.● All types of operation and maintenance should be performed. (Utility equipment’s)● Maintain

➢ Prepare route cards by deciding the machining process as per part requirements.➢ Monitoring of tool parts manufacturing status & processes as per Plan,➢ Raise / Request tool steel material & consumables in SAP as per BOM.➢ Preparation of routing for all tool parts as per drawing.➢ Standard Tool steel material & consumables stock maintain in stores.➢ SFG material maintaining (Punch holders, dies, wire cut blocks, pillars, bushes &etc.).➢ Preparation of

Location- Hyderabad Key Responsibilities:Lead customer-facing activities, aftermarket sales, service, and engineering for Rail & Marine.Full P&L accountability.Build strong customer relationships and develop a 5-year strategic plan for India.Lead, mentor, and manage sales, service, and engineering teams, focusing on building a robust engineering team in IndiaDrive cost reduction, localization, and achieve regional performance targets. Qualifications &

Business details :     HPS – Lifecycle Solutions & ServicesPosition :                   Engineer - ServicesQualifications :          B.E- Instrumentation/ ElectronicsBase Location :         VadodaraNo of Positions :       1Job Profile -               Field Service EngineerDescriptionBE/BTECH (Regular candidate) from reputed universities with instrumentation and control as core subjectFluent in English with good interpersonal and writing skills.Candidate

Position: Factory HeadLevel: Deputy GM/GMFactory Head is responsible for implementing manufacturing strategy and strategic operational goals by overseeing all aspects of a factory operations including; planning, supply chain, scheduling, quality control, safety compliance, manpower management, maintenance, and ensuring efficient production while meeting quality standards and delivery deadlines. He/she will lead teams, manage budgets, and collaborate with

OT TechnicianAre you a skilled and experienced OT Technician looking for a challenging and rewarding opportunity? We are seeking a highly motivated individual to join our team and contribute to our mission of providing exceptional patient care. This is a full-time position offering competitive compensation and benefits.TasksResponsibilities will include, but are not limited to: Providing occupational therapy services to patients; Developing and

Dear  Candidate We have an opening for Mechanical support  in Bathinda Punjab Job Type - Off role - 1 year extendable contract role Required - Cement background exp in Wagaon tippler, roller proess , erection activities  Interested candidates please drop your cv to nirmal.s@randstad.co.inexperience8

Key Responsibilities:Perform hands-on preventive and corrective maintenance on mechanical systems such as pumps, gearboxes, blowers, conveyors, rotary equipment, valves, and chillers.Diagnose and troubleshoot mechanical issues to identify root causes and carry out timely repairs.Carry out equipment alignment and balancing procedures as required.Ensure all maintenance activities comply with safety, health, and environmental regulations.Maintain accurate

Designation:Process accosiate Fresher -1years Duration:6monthCTC Offered:3lpaLaptop is must with Windows 10 with 16GB RAMShift :Night and rotational shift Location:Bangalore  Fluent in English – spoken and writtenProficient in MS Office, including Excel, Access and PowerPointKnowledge on Fixed Income, Equities, Derivatives & FX related products & Money Market productsExperience with vendor systems – Refinitiv & Bloomberg data feedExcellent attention to

Working day - 6 Days in a weekWork Type - General timeWork Time - 9 AM to 6 PMJob Type - Permanent  PostInstrument Engineer API PharmaExperience5-8 YearsQualificationB.E / B.Tech / Diploma  - Electrical & Communication, Instrumentation.Work LocationVapi GujaratNo. of Vacancy1 Nos. JOB RESPONSIBILITY :-Core instrument engineer who should have 5 to 8 years of experience in API Pharma If you're interested kindly share your updated resume with the below

Required Skills (Must Have and should meet all the below standards for qualifying to this role) Products – Asr9K/NCS Tech – OSPF, ISIS, BGP,MPLS, L2VPN/L3VPN/Segment Routing, IP RAN, front/back haul, Core IP transport Architecture, IOS-XR/IOS-XEConsulting – SP experience with creating design document & implementation in SP CoreMOBILITY – 5G,4G, CPS, PCRF , MOG , DRAProject Specific Skills: Required Skills (Must Have and should meet all the below standards

Job PurposeThe Engineer – Shot Blasting & Paint Shop is responsible for supervising surface preparation and painting activities for batching plant components. This includes operating and maintaining shot blasting machines, monitoring primer and finish paint application, ensuring quality and safety compliance, and maintaining productivity across paint booths and drying areas.Key ResponsibilitiesSurface Preparation & Painting Operations:Supervise shot

Key ResponsibilitiesProduction & Fabrication:Supervise the fabrication and mechanical assembly of batching plant structures as per production schedules.Ensure adherence to approved drawings, welding procedures, and fabrication standards.Monitor activities such as cutting, fitting, welding, and bolting for modular components.Coordinate with PPC for workflow scheduling and material availability.Ensure stage-wise and final inspection compliance.Process

Requirements: Bachelor’s degree in Mechanical engineering Minimum of 6-8 yrs experience ( preferably from wind industry) in Mechanical drive trains and roller bearing (e.g. design and development, as well as evaluation of fault conditions and error analysis), preferably big size roller bearings Proven experience in project coordination or similar role Strong analytical and data manipulation skills in Excel Strong organizational and time management skills